Thursday, January 28, 2016

ARRL January VHF Contest is here

This coming weekend is the January VHF contest.  Unlike HF contests that fill the bands with stations upon stations, to those who do not participate in the VHF contests these contests go virtually unnoticed as they take place mostly out of site from FM repeater operation that most think of when it comes to VHF.


For those who do weak signal work on VHF, these are weekends the VHF bands, from 6m thru light come alive!!


Many folks don't think they even have the right equipment to get involved or even help out their local VHF operators, but access to the VHF contest may be easier than you think.


Many (if not most) HF rigs these days include 6m.  The 6m band is the lowest of the VHF bands and on 6m you can join in with the VHF excitement!


You can also find some FM operation so your 2m or 70cm mobile rig or HT is sufficient to make contest contacts.   There is actually a FM only class of operation which is trying to encourage more participation.


My favorite class is operating as a rover where I move from grid square to grid square and every time I change a grid I can work stations over again from the new grid.


January VHF contest information can be found here:  http://www.arrl.org/january-vhf


You can read about where I will be during the upcoming contest here http://www.qrz.com/db/K2EZ
If I will be passing someplace near you I would love to work you.  You can track my location here http://aprs.fi/static/?call=K2EZ&z=6 during the contest to find when I am in your area.  Be aware that is a static page so you need to manually refresh to see my position update.


I hope to catch you on the VHF airwaves this weekend!

Thursday, January 14, 2016

Amateur Radio RST System



Readability - Strength - Tone: RST Signal Reports


R-S-T
Numeric Value Readability - R Strength - S Tone - T (cw only)

1 Unreadable Faint signals, barely perceptible Sixty cycle a.c or less, very rough and broad
2 Barely readable, occasional words distinguishable Very weak signals Very rough a.c., very harsh and broad
3 Readable with considerable difficulty Weak signals Rough a.c. tone, rectified but not filtered
4 Readable with practically no difficulty Fair signals Rough note, some trace of filtering
5 Perfectly readable Fairly good signals Filtered rectified a.c. but strongly ripple-modulated
6 Not used Good signals Filtered tone, definite trace of ripple modulation
7 Not used Moderately strong signals Near pure tone, trace of ripple modulation
8 Not used Strong signals Near perfect tone, slight trace of modulation
9 Not used Extremely strong signals Perfect tone, no trace of ripple or modulation of any kind



Notes

Select the signal's most consistent characteristic from each of the R, S, and T columns in the chart. Select the number from the R-S-T Numeric Value (left) column which corresponds to each characteristic chosen. This R-S-T sequence of numbers becomes the RST signal report.

If the signal has the characteristic stability of crystal control, the letter X may be added to the end of the RST report.

Use the letter C to indicate a chirp on the signal.

Use the letter K for key clicks.

"RST is 599" - means that the morse code cw signal being assessed is Readability 5 (perfectly readable), Strength 9 (extremely strong signal), Tone 9 (perfect tone). This is the ultimate (or "perfect") cw signal.

This reporting system may also be used for phone operation by leaving out the Tone (T) portion of the report. For example, a signal of "5 9" means that the phone signal is Readability 5, and Strength 9; a perfectly readable and extremely strong signal. The term "S-9" is also used to report a Strength 9 for an extremely strong signal. If an S-Meter is being used as a basis of the signal report, an S-9 is the notation for 9 (S-Units) on the meter.


thanx for Maxwell at buffalo edu for some information


***************************************************************

RSQ system for Digital QSO's





Tuesday, January 5, 2016

If you build it they will come


That is the radio signals and contacts will come.

For the new ham getting on HF, putting up an antenna can become an obstacle that stands in their way.  HF antennas take space and some bands taking lots of space. There are all sorts of opinions of what is best.  There are all sorts of technical detail such as insulators, wire type, baluns, feedline, etc.  And then there is the problem of where to put it and how to support it.


Often this can cause a sort of paralysis.


So where to start?


A good place to start is to recognize that there is no perfect antenna and that any antenna is better than none.  Also recognize that it can be fun to try something and change it for something else.  The basic construction materials for antennas (wire, feedline, rope) can always be re-purposed from one under performing antenna experiment into another hopefully better antenna.


Also recognize that for basic HF operation with 100 watts, there isn't a need to go overboard with insulators, baluns, etc.  A piece of wood or a PVC plumbing fitting with a couple holes will suffice for a center insulator.  A nylon rope will provide enough insulation at the ends. 


When looking at where to put the antenna keep in mind that dipoles are very tolerant of bends.  When running 100 watts, if you use insulated wire, the wire can be looped over tree branches.  There is no need to make it sit out in completely open space between supports and strait runs don't make much difference.  You will be amazed at what antennas will tolerate.


Don't worry about getting it in the best position getting it highest.  Get something, try it, and improve on it next time.  Inverted V antennas are a great alternative to dipoles as they only require one support.


Don't worry about making an antenna work for all bands.  Focus on one and like 40m which is a good band for some day operation and some night operation.  20m or 15m for more distance although more daytime oriented.  20m or 15m also can be easier because of their smaller size.


The ARRL Antenna book can be a great source of ideas as well as technical reference.


Commercial antennas, while perhaps not as much fun as building your own, can let you get started and some models are multi-band.


Those magic boxes called antenna tuners can also be helpful, but a word of caution here.  While they can match an antenna and make your rig happy, as well as being used in many circumstances without significant degradation, they can also be mis-used.  If used the wrong way such as correcting very high mismatch when using coax can result in most of your power ending dissipated in the tuner and feedline rather than radiated.  For the beginner it is best to use a tuner with commercial antennas designed to work with a tuner such as the (G5RV) or only use the tuner match to antennas that are mismatched no more than 5:1.


In the end though, you can't work them if you don't put up an antenna.  So don't angst over what is best, just put something up to start with, use it, and improve upon it.

Friday, December 4, 2015

Street Lamp QRM?



After many months with severe buzzing on the HF bands in the evenings it looks like there is a promising lead finally. 


The buzzing has been S6 to S9 with the worst being 40m.  It has been especially maddening as sometimes it would randomly stop and the clarity would be amazing.


But what was causing this?  Power lines someplace seemed like a culprit, but where?  Driving around trying to find noise peaks from the mobile wasn't to help as the antenna on the car just wasn't as sensitive as the big antennas at the house and the ignition noise was just as strong as the noise being hunted.


A friend then mentioned how he was having bad noise and found it to be the street lamps on his road.  That after getting the power company to service the lights the bands were once again quiet for him.


So what is up with the lights?  Apparently it is normal during turn on of those popular yellow/orange street lamps for them to make RF noise that lasts a short bit (20 or 40 seconds).


When these lights start to go bad they can sit in a perpetual turning-on state.  They can turn on and as soon as fully on  immediately turn off and then start turning on again.  Or they can sit in a half turned on state.  When neither fully off nor on fully on they make RF noise.


A few days later while listening to 20M in the afternoon with the band sounding clear, the buzzing suddenly started.  A quick look out the window shows it was starting to get dark out.  The street lamp in front of the house was still out but it was that time of day street lights would be turning on.  After 20 seconds or so the buzzing stopped.  Was that a street lamp turning on?  Not sure, none within view of the house are on.  The buzzing starts again, a quick look out the front window and the street lamp in front of the house is just starting to turn on.  Shortly thereafter the buzzing stops, another look at the street lamp and it looks fully on.


Back to the radio, more buzzing starts but is fainter, perhaps a lamp further away?  More listening and the pattern keeps repeating, sometimes stronger, sometime weaker, sometimes overlapping.  But it is a buzzing that occurs for a 10s of seconds and then goes away.  Yes it makes sense, it is the different street lamps coming on in the area. 


Eventually a buzz picks up and doesn't go away expect for the occasional few seconds.  Perhaps this is a faulty light?  It is now dark out, all lights should be on.  The street lamps that can see from the house are all fully on, but are there any in the area not working right?  Its time for a drive.


During a drive around the neighborhood reveals three street lamps stuck in a half on condition, one turning off every time it turns on and two completely off.  A total of 6 faulty lights within a mile.  One of the ones completely off is behind the house and if that is making noise that could be the biggest culprit.


With the pole number recorded for the problem lights and reported to the electric company now we just need to see how long it takes for them to get fixed and see if this resolves the nighttime buzz. 


Keeping our fingers crossed on this one. 
K2EZ

Thursday, September 3, 2015

What is in your GO KIT?


http://www.arrl.org/files/file/A​RESFieldResourcesManual.pdf

http://www.qsl.net/kc0nrk/go-bag​s.html


University of Pittsburgh has an online disaster preparedness https://www.coursera.org/learn/d​isaster-preparedness


candles, medicine, flashlight, paper , pen

what else do you have?


Wednesday, July 22, 2015

QST - YL on front cover KM4HFY


This is wonderful that a YL is on the front cover of QST.

KM4HFY = Megan Brown via W4MSA - Martha Muir

send W4MSA email congratulating Megan and Martha

Let's get more YL's on the front cover of QST.

QRV - we are ready

Friday, June 26, 2015

EME net


for those of you just getting interested in EME - Moonbounce operation,
there is a net operation every weekend where you can obtain additional
information or make schedules. The net starts aprox 1500 GMT on 14.345 Mhz
with 432 and above EME. It is followed by the 2 mtr EME net at aprox 1600/1700 GMT.
EME scheduling from the nets is done with the SKD program. SKD is freeware
developed by W9HLY, N1BUG and AF9Y. Here's the latest version: skd87a.zip (181K Bytes)

The data files for SKD87a are updated every Monday Evening by Brian Manns, W3EME.
You can contact him at w3eme@mtwirefree.net for automatic emailing each week or
you can download it here: vhfsched.skd (aprox 90K Bytes)

taken from af9y.com

Featured Post

POTA:UKEICC 80m Contest: 2000Z-2100Z, Mar 27 -- Feld Hell Sprint: 0000Z-2359Z, Mar 30

2024  Parks ON The Air   www.parksontheair.com ******************************************************************************           ...